iCAP PRO

Cost-effective ICP-OES for routine multi-element analysis. Designed for high-matrix robustness with a vertical torch design. Incorporates iFR (intelligent Full Range) analysis for simplified workflows.

• Status: Active
• Country: USA
• Elemental: Yes
• Type of measurable elements: Metals and non-metals
• Measurable isotopes/elements: Across 167–852 nm
• Sensitivity : Sub-ppb detection limits
• Dynamic range : Wide dynamic range covering 6–7 orders of magnitude
• Signal stability, relative standard deviation : <1% RSD over extended operations; highly robust
• Spray chamber : Single-pass glass cyclonic spray chamber; options for high solids and acid resistance
• Nebulizer : Glass concentric nebulizer; optional HF-resistant and high-solids options
• Peristaltic pump : High-precision 12-roller pump; speed optimized at 45 rpm
• RF generator frequency : 27 MHz
• RF generator power : Fixed at 1150 W
• View orientation/observation/optical system : Vertical radial and dual-view (axial and radial) plasma observation
• Detection system/detector : CID821 Charge Injection Device detector
• Grating /Wavelength range : Echelle grating; 167.021 to 852.145 nm
• Polychromator : High-efficiency echelle polychromator with UV-optimized cross-dispersion prism
• Typical resolution : <7 pm at 200 nm
• Gas supply: Argon ≥99.995% purity; plasma flow fixed at 12.5 L/min; auxiliary flow fixed at 0.5 L/min
• Power Requirements and Consumption : 200–240 VAC, 50/60 Hz, single-phase; ~2.6 kVA
• Environmental requirements : Temperature: 15–35°C; Humidity: 20–80% (non-condensing)
• Dimensions and Weight: -