Orbitrap Exploris GC

High-Field Orbitrap GC-MS with Fast Scanning and Accurate Quantitation.

• Status: Active
• Country: USA
• Available configurations: 60,000 resolution with MS/MS; 30,000 with MS/MS; 60,000 resolution no MS/MS; 30,000 no MS/MS
• Analyzer type : Orbitrap MS
• Scan modes : Full Scan, SIM, tSIM, MS/MS
• Mass range : m/z 30–3,000
• High resolution : Yes
• Mass resolution/ Mass resolving power : Up to 30,000/ 60,000 (depending on config) at m/z 200
• Ionization Modes : Electron (EI)
• Ionization Modes : Chemical Ionization (CI), Positive/Negative Chemical Ionization (PCI/NCI)
• Dynamic range : >10⁶ (>5,000 within a single Orbitrap mass analyzer spectrum)
• Sensitivity : EI IDL ≤6 fg OFN
• Mass accuracy/Stability : External calibration achieves <3 ppm RMS drift over 24 hours Internal lock mass calibration achieves <1 ppm RMS drift over 24 hours
• Electron energy : 8–70 eV (VeV tuning)
• Acceleration voltage : 4 kV Orbitrap electrode
• Scanning speed : Up to 40 Hz
• Direct inlet option : Yes
• Ion source temperature : 50–350°C
• Collision cell : Ion-routing multipole (IRM)
• Collision energy : Programmable (HCD)
• Installation specifications : EI: 100 fg octafluoronaphthalene on column, scanning m/z 50–300, S/N 10,000:1 EI IDL**: 6 fg octafluoronaphthalene derived at the 99% confidence level PCI: 10 pg benzophenone on column, scanning m/z 80–230, S/N 150:0
• Vacuum system : Single Turbo Pump, 5-stage vacuum
• Power Requirements and Consumption : 2 × 208–240V, 15A, 50/60Hz
• Environmental requirements : 18–27°C, 20–80% RH
• Dimensions and Weight: 954 × 1036 × 703 mm, 156 kg