isoprime visION

Pre-configured isotope ratio mass spectrometer for routine stable isotope analysis with a focus on minimal maintenance and maximum ease of use.

• Status: Active
• Country: Germany
• Isotopic: Yes
• Type of measurable elements: Light stable isotopes (C, N, S, O, H)
• Measurable isotopes/elements: ¹³C/¹²C, ¹⁵N/¹⁴N, ¹⁸O/¹⁶O, ³⁴S/³²S, ²H/¹H
• Analyzer type : Magnetic Sector MS
• Ion source type: Electron impact
• Inlet types: Continuous flow (centrION), compatible with elemental analyzers, gas chromatography inlets, and headspace analyzers
• Mass range : 1–96 Dalton
• Mass resolution/ Mass resolving power : Greater than 110 m/Δm (10% valley separation)
• Multicollector : Yes
• Sensitivity : Continuous flow: High sensitivity for routine applications
• Detection limits : Sub-ppm levels
• Precision : ±0.06‰ for 13C and 15N; ±0.2‰ for 2H
• Detector type : Faraday cup
• Possible amplifiers : 100 V dynamic range with auto-resistor switching
• Acceleration voltage : 5 kV
• Geometry type : 90° magnetic sector
• Focusing type : Single focusing
• Magnetic sector radius/ angle : 108 mm
• Cooling system : Air-cooled system
• Vacuum system : Single turbomolecular pump with high vacuum performance
• Gas supply: Helium, oxygen, and other gases based on application requirements
• Power Requirements and Consumption : 110–240 V, 50–60 Hz
• Environmental requirements : Temperature: 18–25°C; Humidity: ≤60%
• Dimensions and Weight: 59.5 cm (W) x 46 cm (D) x 65 cm (H); weight 102 kg