Sapphire

Collision Cell Multi-Collector Inductively Coupled Plasma Mass Spectrometer (ICP-MS) Incorporates a high-energy ion path and a low-energy path with a collision/reaction cell.

• Status: Active
• Country: UK
• Isotopic: Yes
• Elemental: Yes
• Type of measurable elements: Metals and non-metals
• Measurable isotopes/elements: Mg, Si, S, K, Ca, Ti, V, Cr, Fe, Ni, Se
• Analyzer type : Magnetic Sector MS
• Ion source type: Inductively Coupled Plasma
• Inlet types: Supports wet plasma, desolvation, hydride/cold vapor generation, and laser ablation
• Mass range : 3–310 amu
• High Resolution : Yes
• Mass resolution/ Mass resolving power : High resolution and pseudo high-resolution capabilities
• Multicollector : Yes
• Collectors qty : 16 Faraday detectors, optional up to 6 ion-counting detectors (SEM/Daly)
• Sensitivity : Enhanced sensitivity interface as standard
• Abundance sensitivity : High abundance sensitivity with deceleration filters
• Dynamic range : 0-75 Gcps (0-1200 V) from SEM to 10¹⁰ Ω resistor pre-amplifier
• Detector type : Faraday detectors, SEM/Daly detectors
• Possible amplifiers : Software-switchable resistor amplifiers
• Reaction cell system : Yes
• Reaction cell system details: Hexapole collision/reaction cell; up to 4 independently controlled reaction gas inlets; removal of isobaric interferences using charge exchange reactions
• Spray chamber : Peltier-cooled spray chamber
• Nebulizer : Concentric nebulizer, compatible with desolvating nebulizers
• Peristaltic pump : Multi-channel peristaltic pump
• Torch : High-performance torch for stability
• Interface : Enhanced Sensitivity Interface
• RF generator frequency : 27.12 MHz
• Geometry type : Double focusing
• Focusing type : Variable Zoom Optics
• Cooling system : Water-cooled system for optimal thermal stability
• Vacuum system : Fully dry pumped configuration
• Gas supply: High-purity argon, helium, and optional custom gases for specific systems; Up to 4 mass flow-controlled collision/reaction gas inlets